• MB1010102, Knee Brace X8
  • MB1010302, Mobius Knee Brace
  • mb101050
  • MB1010102, Knee Brace X8
  • MB1010302, Mobius Knee Brace
  • MB1010102, Knee Brace X8
  • MB1010102, Knee Brace X8

Knee Brace X8

599,00 €
Preis inkl. 19,00 % MwSt. plus Versand
Marke
Mobius
Größe
Farbe

 Hier kommt eine völlig Neuentwicklung am Kneebrace Markt – die Mobius Knie-Orthese X8! Super komfortable und leichte Bauweise treffen hier auf ein ausgeklügeltes Seilsystem zum fixieren aufeinander! So bequem und sicher war noch nie ein Knee Brace.

Features:

1. Spritzguss-Schalen Hochfeste Nylon-Schalen, mit 20 % Glasfasern verstärkt, bieten optimalen Schutz. Die Mobius Braces gewähren an den nötigen Stellen beste Flexibilität bei gleichzeitig maximaler Protektion gegen Schläge oder ein Verdrehen des Knies. Sehr schmale Kniepartie, deutlich schmäler als andere Braces.

2. Geschmiedete, anodisierte Aluminiumteile Einstellrad zur Fixierung der Brace, Gelenkanschlag und Scharniere sind aus extra robustem, anodisiertem 6061-T6 Aluminium.

3. UHMWPE Seil (Ultra High Molecular Weight Polyethylene Fiber) Dieses Material findet hauptsächlich Verwendung im Flugzeugbau und beim Militär. Dieses Seil ist die neuste Weiterentwicklung des Kevlar-Materials; noch robuster, reißfester und langlebiger.Das Seil wird um das Knie herum gelegt (Pated Pending) um die Bänder und Gelenke perfekt zu unterstützen und zu stabilisieren.

4. Befestigungs-Pad Rückseite Das Befestigungs-Pad (aus speziellem, flexiblem Kraton-Material) auf der Rückseite führt das Edelstahlseil über kreuz zusammen und verstärkt so die Bänder im Knie. Durch das Kratom-Material-Pad wird ein Verrutschen der Braces verhindert und ein dauerhaft perfekter Sitz garantiert. Bester Tragekomfort auch über mehrere Stunden.

5. Polsterung Die Schaumstoffpolsterung aus Closed-Cell-Ethyl-Vinyl-Acetat (EVA-Schaum) gewährt eine einzigartige Passform und verhindert ein Rutschen der Braces. Der verwendete EVA-Schaum nimmt keine Feuchtigkeit/Schweiß auf ist geruchslos und leicht zu reinigen.

6. Befestigungs-Straps Schlaufen aus Thermo-Plastic-Rubber (TPR). Individuelle Anpassung durch 3 weitere Klettverschlüsse. Riemen sind nummeriert, somit können die Befestigungs-Straps in der richtigen Reihenfolge fixiert werden und garantieren besten Halt am Bein.

 

 

STEP 1 Completely undo Velcro straps #1, #3 and #4.

STEP 2 Pull up on the #2 Tendon Back Plate Cable Release Button above the Cable Tensioning Dial and pull out the #2 Tendon Back Plate as far as it will go. Then slide the X8 over your leg and center the Patellar Shell over your kneecap while bending your leg. The brace should fit snug on the sides of your knee. If it is loose or too snug, choose the appropriate, included Patellar Shell Pad to achieve a snug fit against the sides of your knee.

STEP 3 While holding the Tibial Shell firmly against your upper shin, attach Velcro Strap #1 locating the Tibial Strap Pad above your calf muscle and just below the crease behind your knee.

STEP 4 While holding the Tendon Back Plate against the back of your thigh and above the crease behind your knee turn the Cable Tensioning Dial clockwise until the cable is tight. After adjusting the Cable Tensioning Dial to your desired amount of resistance, there should be between 0.10” (2 mm) and 1.00” (25 mm) of exposed Cable. If the distance is less than 0.10” (2 mm) or the Cable Tensioning Dial locks out, then try replacing the standard Tendon Back Plate pad with the included thicker Tendon Back Plate pads. If you still can’t achieve the proper tension in the cable, then you need a smaller brace. If the distance is more than 1.00” (25 mm) then you need a larger brace.

STEP 5 Attach Velcro Straps #3 and #4 and re-adjust Cable Tensioning Dial, if necessary, so that the Cable is as tight as you can make it without being too uncomfortable. The tighter you make the Cable the better knee protection you will have. To remove the brace first remove Velcro Straps #1, #3, and #4. Then, while holding back the Cable Release Button pull the Femoral Shell away from your thigh until the cable is completely extended and remove the brace.